Pinewood Derby

Hold wheels securely in a drill while removing parting seams for smooth, fast-running wheels.

Apply Dry Transfer Decals by rubbing with a dull pencil or burnisher. Sheet size: 4" x 5" (10.1 cm x 12.7 cm) Colors may vary from actual product.

Use with axle holes or slots to ensure accurate wheel spacing and axle nail alignment. Correctly install axles into slots, and establish proper gap between wheels and body.

Everything you need to prepare a racer’s surface for painting and give it a sleek, showroom shine! Thicker than a typical sealer, Sanding Sealer saturates wood pores, covering the wood grain for a uniform, smooth surface. The surface can be sanded...

Tungsten is 1.7 times denser than lead and offers more control over precise weight distribution. Place more weight in a smaller, precise area. The incremental design allows car builders to bring racers to the maximum weight allowed in exact 1/16 oz (1.77...

Tungsten is 1.7 times denser than lead and offers more control over precise weight distribution. Place more weight in a smaller, precise area. The incremental design allows car builders to bring racers to the maximum weight allowed in exact 1/16 oz (1.77...

Tungsten is 1.7 times denser than lead and offers more control over precise weight distribution. Place more weight in a smaller, precise area. The incremental design allows car builders to bring racers to the maximum weight allowed in exact 1/16 oz (1.77...

This assortment has different grades that fit around a small wooden block easily to make a sanding tool.

Lead-free Stick-on Weights allow you to cut off excess weight as needed, easily. Use included double-sided tape to attach to side of car as part of design. 1 oz (28.3 g) each

Easily adjust lead-free weights right up until the big race. Use the double-stick tape to attach weights to the underside of your racer. Together, the weight and the tape are thin enough for the 3/8" clearance needed for the specifications of most races...

Great for any skill level and only a few tools are required. Pre-Cut measures approximately 1 3/4" w x 7" l (4.44 cm x 17.7 cm) Lubricant, glue and paint not included.

Use this kit to eliminate axle friction and create high performance axles that improve your car's speed.

An extra-fine dry graphite lubricant with molybdenum in a convenient puffer tube. Safe for metal, plastic, wood and rubber. Will not gum up. 6.5 g (0.22 oz)

Use this kit to improve the overall performance of your racer. Save over purchasing items separately.

Dry White Lube, with PTFE lubricant, is white and non-staining. It will not conduct electricity or attract dust. Compatible with metal, wood, plastic and rubber. 3.5 g (0.12 oz) For use on:• Electrical switches and model railroad switch machines• N &...

Combo Weights are easy to install. Drill a 3/8" diameter hole in the car. Place the flat side of two weights together to make round weight and install the weight in the hole. Fill hole with Body Putty (P3928). Sand when dry, then paint. You can also...

Lead-free Strip Weights are incremental, which allow adjustments to a car's weight, even on race day! Break off just enough to meet specifications, keeping the car as heavy as possible. Use included screws to attach the weight to the underside of the...

The lead-free Tapered Weight is incremental, allowing adjustments to your car's weight, even on race day! Break off just enough to meet specifications, keeping the car as heavy as possible. Use included screws to attach the weight to car underside or...

Lead-free Round Weights are easy to install. Drill 3/8" diameter hole in car. Cut off the weight you need, keeping car as heavy as specifications allow. Then, insert the weight into the body of the racer. Fill with Body Putty (P3928). Sand when dry, then...